Search Results:

Jar Test Services – Dairy Application

FRC performed a jar test on the wastewater using aluminum-based coagulant and anionic flocculant. The goal was to investigate the impact of different coagulant dosages on effluent quality. The sample volume sent to FRC was approximately 1 gallon so 6 different chemical dosing regiments were performed to generate effluent COD data.

Read More

Pilot Test – Dairy Application

A cheese facility producing string cheese had instances when their biological ponds were killed off from the raw wastewater influent. The purpose of the pilot test was to determine if placing a DAF prior to their treatment ponds would improve performance, reduce the accumulation of solids, oils & grease and improve overall discharge. The rest […]

Read More

Convenience Foods Application: Turnkey Upgrade Solution

A popular salad dressing and dips company was out of compliance with unmonitored effluent and only had manual testing in place. FRC conducted a detailed site survey to determine how to bring the client back into compliance and improve process reliability. The DAF had whitewater recycle pumps that had been damaged due to air being […]

Read More

Convenience & Prepared Foods: Turnkey Solution

FRC was the choice of a leading copacker of sandwiches and deli spreads for a complete turnkey solution. Our scope consisted of the design of the wastewater treatment system and the mechanical and electrical installation of the new system, giving the client a one supplier solution. This facility produces between 12,000 to 15,000 gallons per […]

Read More

Convenience and Prepared Foods Application: System Solution

FRC supplies wastewater solutions for one of the country’s largest family-owned and -operated prepared foods companies at their plants all across the United States.   Their production process creates wastewater with high levels of Total Suspended Solids (TSS) that must be brought below the required permit level.  FRC provides solutions that not only handle the existing […]

Read More

Bakery Application: Turnkey Solution

FRC designed and supplied a full turnkey mechanical and electrical installation solution for this greenfield bakery manufacturer of rebranded muffins and gourmet iced cakes. The facility had to reduce the high levels of Total Suspended Solids (TSS) and Biochemical Oxygen Demand (BOD) in their wastewater to be able to discharge to a local water source. […]

Read More

Produced Water Application: System Solution for Water Re-Use

A large oil & gas company in the Permian Basil treating 25,000 bbl/d needed a solution for their oily solids laden wastewater. Most of the wastewater is generated from produced water along with some flowback water. The FRC solution included a trailer mounted DAF, stand-alone flocculator, and pump house. This DAF treatment yielded frac-grade-quality water […]

Read More

Health & Beauty Application: Turnkey Solution

FRC was selected by a large privately owned US based cosmetics company to supply the wastewater treatment solution for a new manufacturing facility with expected wastewater volumes of approximately 215,000 gpd. FRC provided a turnkey solution including design, engineering, manufacture, and complete mechanical and electrical installation. The wastewater treatment system was designed to separate solids […]

Read More

Dairy Application: System Solution

FRC was the choice of this Massachusetts based ice-cream purveyor for tackling their wastewater treatment needs.  This facility generated wastewater at peak flows of 160 gpm.  The FRC design sends wastewater from an existing equalization tank to the FRC DAF system for removal of Total Suspended Solids (TSS) and Fats, Oils, and Grease (FOG). The […]

Read More