Automotive Parts Skidded Solution
General Manufacturing
Lösungen für Abwasserbehandlung und -management
FRC-Komponenten
Flocculator, High-Rate DAF
Projektbeschreibung
FRC provided a skidded solution for a stamping mill that provides automotive parts for a leading automobile brand. The wastewater contains Oil and Grease (O&G) from the cleaning of the machinery, plant floors and surfaces. The O&G mainly consists of the mineral oils used to lubricate the machinery and facilitate parts fabrication. The existing Oil Water Separator (OWS) was not meeting discharge requirements. FRC provided a fully skidded DAF system, pre-piped and pre-wired for ease of installation and quick start-up to bring them back to compliance.
Die FRC-Lösung
Flocculator – Chemicals dosed to precipitate the emulsified oil
High-Rate DAF – Float the free oils and the precipitated oil emulsifications, yielding clean effluent water
Parameter | Design Data |
Flow (gpm) | 17 |
Flow (m3/h) | 3.9 |
O&G (mg/L) | 5100 |
Konstruktionsdaten
