Health & Beauty Turnkey Solution
General Manufacturing
Lösungen für Abwasserbehandlung und -management
FRC-Komponenten
Screen, Oil & Water Separation, Flocculator, High-Rate DAF, Sludge Dewatering, Equalization
Projektbeschreibung
FRC was selected by a large privately owned US based cosmetics company to supply the wastewater treatment solution for a new manufacturing facility with expected wastewater volumes of approximately 215,000 gpd. FRC provided a turnkey solution including design, engineering, manufacture, and complete mechanical and electrical installation. The wastewater treatment system was designed to separate solids for further treatment and recover the oil in the wastewater for recycling.
Die FRC-Lösung
Rotary Drum Screen – Course solids removal prior to OWS and equalization.
Oil-Water Separator – Recover oils, removing a significant portion of the oil and gas
Equalization Tanks – Homogenize wastewater for consistent for consistent wastewater characteristics. Aeration mixing is provided to prevent anoxic conditions and formation of ammonia. Two tanks are used for batch operation for the multiple number of products that client produces weekly. This simplifies the downstream chemical dosing regimen
Flocculator – Coagulant, acid, caustic, and flocculant dosed in flocculator to precipitate colloidal solids and emulsified oils
High-Rate DAF – Float the precipitated solids, yielding clean effluent water
Filter Press – Increase dry solids content of the DAF sludge to reduce disposal costs – ready for landfill
Parameter | Effluent Req. |
Flow (gpm) | 150 |
Flow (m3/h) | 34.5 |
O&G (mg/L) | < 200 |
TSS (mg/L) | < 250 |
Konstruktionsdaten
