Get access to all of FRC Systems' case studies, whitepapers, product sheets and more! < Back Document Library Get Free Access to Valuable Resources With decades of industry experience, FRC Systems understands the complexities of wastewater treatment across a wide range of sectors. Complete the form to unlock free access to: Case Studies Whitepapers Product Sheets And more technical resources No cost. Just insights. < Back To have access to our entire library for free, please provide the following: First name* Last name* Email* Company name* Yes, subscribe me to your newsletter. Access & Download

FRC wastewater treatment systems are used throughout the food and beverage industry such as dairy, beverages, fruits & vegetables, edible oils, and convenience & prepared foods. These systems have the ability to remove Total Suspended Solids (TSS), Fats, Oils, and Grease (FOG), Biochemical Oxygen Demand (BOD), and Total Phosphorus (TP). Our processes are operator-friendly and require minimal maintenance and user intervention. Systèmes FRC » Industries Alimentation et boissons Browse Case Studies Solutions pour le traitement et la gestion des eaux usées Liens rapides APPLICATIONS Laitier Boissons Fruits et légumes Huiles comestibles Plats cuisinés et préparés Chaque application de traitement des eaux usées est unique. Notre équipe d'ingénieurs expérimentés a conçu des systèmes allant de produits autonomes à des installations clés en main complètes pour de nombreuses applications diverses dans l'industrie alimentaire et des boissons. Les systèmes de traitement des eaux usées FRC sont utilisés dans toute l'industrie agroalimentaire en raison de leur capacité à éliminer les matières en suspension totales (MES), les graisses, les huiles et les graisses (GOG), la demande biochimique en oxygène (DBO) et le phosphore total (PT). Nos processus sont conviviaux et nécessitent un minimum de maintenance et d'intervention de l'utilisateur. Les systèmes conçus par FRC réduisent les coûts d'exploitation en produisant des solides très secs pour réduire le volume de boues, les coûts d'élimination et les coûts des produits chimiques. Les systèmes sont entièrement automatisés pour réduire l'intervention de l'opérateur et assurer la fiabilité dans des conditions d'affluent changeantes. Industrie laitière Les eaux usées des produits laitiers nécessitent souvent une approche différente pour tenir compte du risque d'odeurs nocives que les produits laitiers peuvent générer au cours du processus de traitement des eaux usées. La conception du FRC utilise une chimie simple, limite les odeurs, minimise l'empreinte totale et génère des boues à forte teneur en solides secs. System Solution Turnkey Solution Industrie des boissons L'industrie des boissons couvre de nombreuses applications telles que les jus de fruits, les boissons gazeuses, les boissons pour sportifs, les boissons maltées, le café, le thé, les établissements vinicoles et les distilleries. FRC fournira une solution détaillée pour chaque application unique et concevra un système de traitement des eaux usées adapté à vos besoins spécifiques. Product Solution System Solution Industrie des fruits et légumes Les applications de fruits et légumes dépendent fortement de l'eau dans leurs processus, du transport, du lavage, de l'épluchage, du blanchiment, de la cuisson et de la mise en conserve ou en bouteille dans le processus de l'usine. Les eaux usées générées dans ces processus ont une teneur élevée en matières organiques en raison d'une grande quantité de matières naturelles. FRC fournit des systèmes complets de traitement des eaux usées comprenant le criblage, le DAF, le traitement biologique et la déshydratation des boues pour gérer les volumes élevés d'eau et les niveaux élevés de matières organiques. System Solution System Solution Industrie des huiles alimentaires Les applications d'huiles comestibles de FRC comprennent les huiles végétales, de soja, de maïs, de palme, de coton, de canola, de lin, de chanvre et autres. Nos systèmes de traitement des eaux usées sont conçus pour rejeter les effluents traités vers les stations d'épuration publiques (POTW) ou les sources d'eau locales. Les avantages supplémentaires peuvent inclure la récupération de sous-produits précieux et la réutilisation de l'eau. FRC peut concevoir une solution adaptée à la manière dont vous souhaitez ou devez traiter vos eaux usées. Turnkey Solution Skidded Solution Industrie des plats cuisinés et des aliments préparés Les aliments de commodité comprennent les produits de boulangerie, les sandwichs, la salade de pommes de terre, les chips, les plats surgelés, les confiseries, les chocolats et bien d'autres. La plupart des applications nécessitent un assortiment de technologies, notamment le tamisage, l'égalisation, le DAF, la déshydratation des boues et, à l'occasion, le traitement biologique, pour une solution complète. Grâce à la vaste expérience de FRC dans ce domaine, nous créerons la solution optimale pour votre application. Turnkey Solution System Solution Turnkey Solution

Oil and gas processing have unique requirements for their wastewater treatment needs in produced & flowback water, renewable energy, oil refineries and stormwater runoff. Systèmes FRC » Industries Pétrole et gaz Browse Case Studies Solutions pour le traitement et la gestion des eaux usées Liens rapides APPLICATIONS Eau de production et de reflux Energie renouvelable Raffineries de pétrole Ruissellement des eaux pluviales Un système de traitement des eaux usées FRC peut avoir un impact significatif sur vos résultats. Les technologies FRC sont utilisées dans diverses applications dans l'industrie pétrolière et gazière. Pour les eaux en amont, produites et de reflux, nous proposons des systèmes de flottation à air dissous (DAF) mobiles et centralisés pour traiter votre eau en vue de son injection, de sa réutilisation ou de son rejet. Dans le segment aval, notre DAF à haut débit est capable de traiter jusqu'à 6 000 GPM d'eaux pluviales dans un seul système compact. Le traitement du pétrole et du gaz a des exigences uniques en matière de traitement des eaux usées. FRC Systems peut concevoir des configurations personnalisées à la fois mobiles et modulaires pour répondre aux exigences de votre application particulière. Eau de production et de reflux L'eau produite et l'eau de reflux doivent être traitées pour éliminer les huiles et les matières en suspension totales (MES). En fonction des exigences de qualité de l'eau d'effluent, un système DAF FRC peut traiter l'eau produite pour la réutilisation, l'injection ou le rejet de l'eau. System Solution System Solution Energie renouvelable Tout au long du processus de broyage à sec, des sous-produits commercialement intéressants peuvent être récupérés et FRC a développé un procédé en deux étapes qui permet de le faire. Avec le procédé FRC, vous pouvez augmenter la rentabilité à long terme et la viabilité économique de votre procédé de broyage à sec existant pour le rapprocher du procédé de broyage humide. Les ingénieurs de FRC ont conçu un système capable d'améliorer la récupération de l'huile de maïs à partir de résidus minces afin d'augmenter la rentabilité à long terme des applications d'éthanol. Une grande quantité d'eaux usées est générée lors du traitement des matières premières utilisées pour la production de diesel renouvelable. FRC dispose de la technologie nécessaire pour récupérer la plus grande quantité possible de pétrole en vue de son retraitement. System Solution Raffineries de pétrole et ruissellement des eaux pluviales L'eau est une ressource majeure utilisée dans le raffinage des hydrocarbures. FRC fournit des séparateurs huile-eau (OWS) tels que des intercepteurs à plaques ondulées (CPI) et des séparateurs de l'American Petroleum Institute (API) ainsi que des systèmes de flottation à air dissous (DAF), de flottation à gaz dissous (DGF) et de flottation à azote dissous (DNF) pour l'élimination des huiles, des solides en suspension (TSS), des métaux et d'autres contaminants du flux d'eaux usées Product Solution Product Solution

FRC Systems has installations in all major industries like Food & Beverage, General Manufacturing, Oil & Gas, Meat & Seafood Processing and Municipal Wastewater. Our variety of wastewater treatment equipment includes Dissolved Air Flotation (DAF) Systems, Flocculators, Screens, Oil & Water Separators, Biological Treatment such as MBBR & MBR, and dewatering presses such as belt presses and a multi disk volute press. Systèmes FRC » Industries Alimentation et boissons Browse Case Studies Solutions pour le traitement et la gestion des eaux usées Food & Beverage FRC wastewater treatment systems are used throughout the food and beverage industry because of their ability to remove Total Suspended Solids (TSS), Fats, Oils, and Grease (FOG), Biochemical Oxygen Demand (BOD), and Total Phosphorus (TP). Our processes are operator-friendly and require minimal maintenance and user intervention. Explore Food & Beverage General Manufacturing Manufacturing applications each have their own qualities that present unique wastewater treatment challenges. Whether you want to recover oil for reuse or remove wastewater constituents like heavy metals, sand, or clay to bring you into compliance, FRC can deliver the best solution. Explore General Manufacturing Meat & Seafood Processing Meat processing facilities produce wastewater with high amounts of Total Suspended Solids (TSS), Fats, Oils, and Grease (FOG), Biochemical Oxygen Demand (BOD), and Total Phosphorus (TP). FRC solutions excel in recovering commercially valuable by-products. Wastewater treatment systems designed by FRC provide a cost-effective treatment process to make the most meaningful impact on your bottom line. Explore Meat & Seafood Processing Municipal Wastewater Our municipal Dissolved Air Floatation (DAF) units are designed to work with municipal wastewater treatment systems. Enhance your treatment system using dissolved air flotation to thicken waste-activated sludge (WAS) prior to anaerobic digestors or remove algae and phosphorus (TP) using a high-rate DAF. Explore Municipal Wastewater Oil & Gas FRC technologies are used in various applications throughout the oil and gas industry. For upstream, produced and flowback water, we offer both mobile and central plant Dissolved Air Flotation (DAF) systems to treat your water for injection, reuse, or discharge. In the downstream segment, our high-rate DAF is capable of treating up to 6,000 GPM of stormwater runoff in a single compact system. Explore Oil & Gas

Our municipal Dissolved Air Flotation (DAF) units are designed to work with municipal wastewater treatment systems. Enhance your treatment system using dissolved air flotation to thicken waste-activated sludge (WAS) prior to anaerobic digestors or remove algae and phosphorus (TP) using a high-rate DAF. Systèmes FRC » Industries Eaux usées municipales Browse Case Studies Solutions pour le traitement et la gestion des eaux usées Liens rapides APPLICATIONS Élimination des algues et du phosphore Épaississement WAS Quelle que soit l’application, FRC dispose d’une solution de pointe pour votre application. Les unités de flottation à air dissous (DAF) de FRC sont un excellent complément aux systèmes municipaux de traitement des eaux usées pour améliorer le traitement, éliminer les algues et le phosphore des lagunes municipales, épaissir les boues activées par les déchets (WAS) et traiter les intrants industriels qui n'ont pas été correctement prétraités. Quelle que soit l'application, FRC a une solution de pointe pour votre application. Ces solutions sont des systèmes robustes et conviviaux qui présentent un encombrement minimal ainsi que de faibles dépenses chimiques et d'exploitation, ce qui permet une alternative rentable aux solutions traditionnelles. Nos unités municipales de flottation à air dissous (DAF) sont conçues pour fonctionner avec les systèmes municipaux de traitement des eaux usées. Améliorez votre système de traitement en utilisant la flottation à air dissous pour épaissir les boues activées par les déchets (WAS) avant les digesteurs anaérobies ou éliminer les algues et le phosphore (TP) à l'aide d'un DAF à haut débit. Élimination des algues et du phosphore En règle générale, les municipalités traitent séparément les proliférations d'algues et le phosphore. Un système de flottation à air dissous (DAF) à haut débit FRC peut atténuer l'impact négatif des proliférations d'algues en éliminant efficacement les algues et le phosphore associé en même temps. Ces solides peuvent être précipités chimiquement des eaux usées à l'aide d'un coagulant, puis agglomérés avec un floculant, ce qui peut être fait dans un réacteur à écoulement piston (PFR). Un DAF FRC est ensuite utilisé pour éliminer les solides. Une élimination totale du phosphore jusqu'à 99 % est possible avec cette méthode de précipitation des sels métalliques. System Solution System Solution System Solution Épaississement WAS Les systèmes de traitement biologique avec un clarificateur secondaire produisent des boues dont la teneur en solides secs se situe entre 0,5 et 1,0 %. Étant donné qu'une grande partie des boues est constituée d'eau, des mécanismes d'épaississement appropriés doivent être mis en œuvre pour réduire le volume de boues envoyées vers un digesteur anaérobie ou réduire la taille de l'équipement de déshydratation et les coûts d'élimination des solides. Les systèmes de flottation à air dissous (DAF) peuvent épaissir les boues aérobies et anaérobies jusqu'à 4 à 10 % de solides. Dans cet état, les boues sont mieux préparées à la digestion et à la déshydratation. Product Solution Product Solution

Thanks! Your submission has been sent. Thanks! Your message has been sent! A member of our team will review your submission and get back to you as soon as possible. In the meantime, explore more of FRC Systems... Landing Page New Page New Page New Page Industries New Page Food & Beverage General Manufacturing Meat & Seafood Processing Municipal Oil & Gas Solutions Project Archive PCL & PCCS High-Rate DAF PWL Open-Style DAF Flocculators Oil & Water Separators Belt Press Multi-Disk Volute Press Biological - MBBR Biologicial - MBR Screens Rentals & Pilots System Upgrades Aftermarket & Spare Parts Services Pilot Testing Jar Testing Resources Knowledge Center News New Page FAQ About FRC About FRC Sales & Support Team Directory Privacy Privacy Privacy Accessibility Le guide ultime de l'acheteur d'un système DAF : Conclusion At face value DAF systems are pretty much like any other piece of industrial equipment – they’re an investment that you only want to make... 2 min de lecture FRC Systems présentera des solutions avancées de gestion des eaux usées à l'IPPE 2025 à Atlanta December 11, 2024 – FRC Systems, a leading provider of innovative wastewater treatment solutions, is proud to announce its participation... 3 min de lecture

FRC Systems provides wastewater treatment solutions, including Dissolved Air Flotation DAF, Sludge Dewatering, Chemical Dosing and Biological wastewater treatment systems. Sludge Dewatering Technology for Smarter Water Management Multi-Disc Screw Press Check it out Featured Products DAF à haut débit série PCL et PCCS La conception de flottation à air dissous (DAF) à haut débit des séries PCL et PCCS offre une solution efficace et rentable pour éliminer les polluants de vos eaux usées. Learn More Presse à volute multidisque pour déshydratation des boues La gestion des boues peut être difficile, mais pas avec la presse à volute multidisque de FRC Systems. Learn More Pièces de rechange et de rechange La disponibilité immédiate des pièces permet une gestion adéquate qui permet au système de traitement des eaux usées de fonctionner à des performances optimales. Learn More See All Products La différence FRC Avec près de 50 ans d'expérience dans le secteur et des milliers d'installations à travers le monde, FRC Systems s'engage à mettre à profit sa vaste expertise en matière d'applications de solutions de traitement des eaux usées. Nous nous engageons à offrir un soutien continu et des solutions innovantes pour l'avenir. À propos de FRC Systems Rencontrez notre équipe Près de 50 ans de leadership dans l'industrie Des milliers d'installations dans le monde Expérience d'application et connaissances illimitées Axé sur le client. Basé sur des solutions. Résultats garantis. News & Updates Le guide ultime de l'acheteur d'un système DAF : Conclusion FRC Systems présentera des solutions avancées de gestion des eaux usées à l'IPPE 2025 à Atlanta FRC Systems a transformé notre processus de traitement des eaux usées. Leur expertise et leurs solutions innovantes ont considérablement amélioré l'efficacité de notre usine. Nous sommes reconnaissants de leur soutien continu et recommandons vivement leurs services. Chef de produit Entreprise de produits alimentaires et de boissons L'installation de la solution de traitement des eaux usées de FRC Systems s'est déroulée de manière fluide et professionnelle. Les connaissances et le dévouement de leur équipe ont fait une différence notable dans nos opérations. Nous ne pourrions être plus satisfaits des résultats. Responsable de la conception des installations Entreprise de santé et de beauté Le choix de FRC Systems pour nos besoins en matière de traitement des eaux usées a été une véritable révolution. Leur système est fiable et leur service client est exceptionnel. Nous avons constaté une nette amélioration de notre conformité environnementale et de nos coûts d'exploitation. Directeur des opérations de l'usine Société pétrolière et gazière Pourquoi choisir les systèmes FRC ? Expérience et savoir-faire en matière d'application Nos équipes de conception et d’ingénierie sont dirigées par des spécialistes hautement reconnus dans le domaine du traitement des eaux usées, possédant en moyenne plus de 25 ans d’expérience dans le secteur. Axé sur le client Tous nos systèmes sont conçus pour répondre à un défi spécifique. Nous nous concentrons sur les objectifs du client dès le début du processus de conception jusqu'à l'installation et la mise en service. Notre objectif n'est pas seulement de créer un système qui fonctionne, mais un système qui fonctionne pour vous. Attention personnelle Chaque projet bénéficie d’une attention individuelle tout au long du processus de la part d’un chef de projet dédié et d’une équipe de nos ingénieurs expérimentés. Une qualité à laquelle vous pouvez faire confiance Le processus de conception FRC comprend des soumissions professionnelles avec des dessins 3D détaillés pour approbation avant la fabrication. Nos produits sont construits à l'aide d'une fabrication et d'un assemblage en acier inoxydable découpés au laser pour assurer un contrôle de la qualité. FAQ

Ooops....we're so embarrassed. We have recently launched a new website, so the URL's may be different from the last site... OR... The page you're trying to reach does not exist. You can use the search bar below to see if you can find what you are looking for:

Meat processing facilities produce wastewater with high amounts of Total Suspended Solids (TSS), Fats, Oils, and Grease (FOG), Biochemical Oxygen Demand (BOD), and Total Phosphorus (TP). Business such as poultry, beef, pork, rendering, seafood and pet food have found FRC systems a valuble resource. Systèmes FRC » Industries Transformation de la viande et des fruits de mer Browse Case Studies Solutions pour le traitement et la gestion des eaux usées Liens rapides APPLICATIONS Volaille Bœuf Porc Rendu Nourriture pour animaux de compagnie Fruit de mer Les solutions FRC excellent dans la récupération de sous-produits à valeur commerciale. Les systèmes de traitement des eaux usées FRC comprennent des conceptions entièrement personnalisables utilisant des équipements hautement durables, notamment des unités de flottation à air dissous (DAF), des tamis à tambour rotatif, des réservoirs d'égalisation, un traitement biologique utilisant des réacteurs biologiques à membrane (MBR), des réacteurs à biofilm à lit mobile (MBBR), des boues activées conventionnelles (CWAS) et la déshydratation des boues. L'équipe d'ingénieurs qualifiés de FRC est experte dans la conception du système pour répondre à vos besoins spécifiques, d'un produit autonome à une installation mécanique et électrique clé en main. Les systèmes seront conçus pour répondre aux exigences de rejet et récupérer des sous-produits précieux tels que des protéines et des produits non comestibles pour le traitement. Les installations de transformation de la viande produisent des eaux usées contenant de grandes quantités de matières en suspension totales (MES), de matières grasses, d'huiles et de graisses (MGH), de demande biochimique en oxygène (DBO) et de phosphore total (PT). Les solutions FRC excellent dans la récupération de sous-produits à valeur commerciale. Les systèmes de traitement des eaux usées conçus par FRC offrent un processus de traitement rentable pour avoir l'impact le plus significatif sur vos résultats. Industrie de la volaille Les équipements de traitement des eaux usées FRC sont utilisés depuis des décennies pour traiter les eaux usées de volaille, réduisant les matières en suspension totales (TSS), les graisses, les huiles et les graisses (FOG), la demande biochimique en oxygène (DBO) et le phosphore total (TP) à leurs limites autorisées tout en récupérant des sous-produits précieux. Les ingénieurs FRC conçoivent des systèmes pour les principales usines de transformation de volaille du monde entier depuis des décennies. Bon nombre de nos systèmes DAF d'origine sont toujours en service aujourd'hui. Turnkey Solution System Solution Industrie de la viande bovine Nos ingénieurs savent que lors de la transformation du bétail, leur sang, leur viande, leur graisse, leur panse, leur fumier et d'autres matières se combinent pour créer des eaux usées difficiles à traiter. C'est pourquoi nos systèmes incluent la bonne combinaison de nos produits hautement durables, conçus pour résister aux matières granuleuses présentes dans l'eau. Votre système idéal comprendra la bonne combinaison de tamisage, d'égalisation, de DAF, de MBR, de MBBR ou de CWAS. Avec des décennies d'expérience dans l'industrie du bœuf, FRC analysera votre installation et concevra le système de traitement des eaux usées adapté à vos besoins uniques. System Solution System Solution Industrie porcine Nous avons conçu un système innovant pour l'industrie porcine, conçu spécifiquement pour maximiser la récupération de sous-produits précieux et permettre leur rejet dans les usines de traitement publiques (POTW). La transformation du porc est unique en raison des phases d'échaudage et d'épilation qui génèrent des niveaux particulièrement élevés de matières grasses, d'huiles et de graisses (FOG) et de matières solides en suspension totales (TSS) dans le flux d'eaux usées. FRC est un innovateur de premier plan en matière de systèmes utilisant une combinaison de produits pouvant inclure le criblage, l'égalisation, le DAF et le traitement biologique à l'aide du MBR, du MBBR ou du CWAS. System Solution System Solution Industrie du rendu Les systèmes de traitement des eaux usées de FRC sont conçus pour lutter contre les eaux usées très concentrées créées lors du processus de traitement. Lorsque les graisses et l'eau sont séparées des tissus animaux, des produits comestibles et non comestibles sont créés. Les déversements provenant des équipements de cuisson, des réservoirs de collecte et des rejets de lavage contribuent aux eaux usées. Au cours du processus de traitement, de grandes quantités de graisses, d'huiles et de matières en suspension (FOG) et de matières solides totales en suspension (TSS) se forment. FRC DAF utilise un système d'aération des eaux vives fiable construit en acier inoxydable 304 pour minimiser l'encrassement du système et maximiser la durée de vie de l'équipement. System Solution Industrie des aliments pour animaux de compagnie Les producteurs d'aliments pour animaux de compagnie transforment et mélangent des protéines animales, des légumes, des céréales et d'autres ingrédients biologiques pour fabriquer des aliments secs ou humides, produisant ainsi d'importantes quantités d'eaux usées présentant des concentrations élevées de demande chimique en oxygène (DCO), de matières solides totales en suspension (MES), de graisses, d'huiles et de graisses (FOG) et de demande biochimique en oxygène (DBO). FRC conçoit des systèmes comprenant le criblage, l'égalisation, le DAF et le traitement biologique à l'aide d'un bioréacteur à membrane (MBR), d'un réacteur à biofilm à lit mobile (MBBR) ou d'un système de boues activées en continu (CWAS). En fonction des contaminants des eaux usées, FRC peut concevoir la solution idéale pour votre application. System Solution Turnkey Solution Industrie des fruits de mer Les applications de fruits de mer comprennent le corégone, le thon, le saumon, les crevettes, le krill et de nombreux autres types de fruits de mer. La plupart des processus de traitement des eaux usées de fruits de mer nécessitent un système qui combine un tamisage fin, une égalisation, un DAF, un traitement biologique et une gestion des boues. FRC dispose d'une gamme complète de produits conçus pour traiter la teneur élevée en huile des eaux usées, permettant ainsi la récupération de cette teneur en huile. Skidded Solution Turnkey Solution

FRC systems are custom designed to combat the harsh environments often found in industrial manufacturing environments. These DAF systems can be found in vertical markets such as automotive parts, chemical, health and beauty, pharmaceuticals and wood applications. Systèmes FRC » Industries Fabrication générale Browse Case Studies Solutions pour le traitement et la gestion des eaux usées Liens rapides APPLICATIONS Pièces détachées automobiles Chimique Santé et beauté Médicaments Bois L’industrie manufacturière générale est confrontée à un large éventail de défis en matière de besoins en matière de traitement des eaux usées. Notre équipe d’ingénieurs expérimentés a conçu des systèmes pour des entreprises de l’industrie manufacturière. Nos systèmes sont conçus sur mesure pour lutter contre les environnements difficiles que l'on retrouve souvent dans les environnements de fabrication industrielle. Les ingénieurs de FRC créeront un système optimisé pour traiter la composition spécifique des eaux usées de votre secteur. Chaque application industrielle présente des caractéristiques qui lui sont propres et qui posent des défis uniques en matière de traitement des eaux usées. Que vous souhaitiez récupérer du pétrole pour le réutiliser ou éliminer des constituants des eaux usées comme les métaux lourds, le sable ou l'argile pour vous mettre en conformité, FRC peut vous proposer la meilleure solution. Industrie des pièces détachées automobiles Les applications automobiles comprennent les usines d'emboutissage, la fabrication de pièces, les fabricants de transmissions, les chaînes de montage et le moulage sous pression, qui nécessitent toutes une approche de conception bien pensée. Les systèmes complets de traitement des eaux usées de FRC sont conçus pour éliminer les huiles, les graisses, les produits chimiques de nettoyage et les métaux lourds que l'on trouve couramment dans les eaux usées automobiles. Nos systèmes sont conçus pour minimiser l'utilisation de produits chimiques et réduire le volume de boues, ce qui se traduit par des économies de coûts accrues. Turnkey Solution Skidded Solution Turnkey Solution Industrie chimique L'industrie chimique est très diversifiée et complexe. Les besoins en matière d'épuration des eaux usées vont de la séparation huile-eau à la séparation solide-liquide, en passant par le traitement biologique. FRC conçoit des systèmes pour l'industrie chimique depuis des décennies et mettra son expérience à profit pour concevoir le meilleur système de traitement des eaux usées pour votre application. System Solution Secteur de la santé et de la beauté FRC conçoit des systèmes de traitement des eaux usées hautement durables utilisant un procédé par lots composé de plusieurs réservoirs d'égalisation avec mélange pour lutter contre la diversité des eaux usées produites dans les usines de produits de santé et de beauté. Notre approche peut vous aider à récupérer les précieux restes de produits et d'huiles des eaux de lavage tout en éliminant les contaminants des eaux usées avant leur rejet. Turnkey Solution Skidded Solution System Solution Industrie pharmaceutique Chez FRC, nous savons que le meilleur système de traitement des eaux usées est conçu pour protéger les systèmes de traitement biologique coûteux nécessaires aux applications pharmaceutiques. FRC possède l'expérience nécessaire pour développer la solution adaptée à vos besoins de traitement des eaux usées, qui peut inclure un système de flottation à air dissous (DAF) avant et/ou après le système biologique. Turnkey Solution System Solution Industrie du bois FRC Wastewater propose une gamme complète d'équipements de traitement des eaux usées pour concevoir un système à grande échelle pour l'industrie du bois manufacturé. Cela peut inclure un tamis à tambour rotatif, une égalisation, une flottation à air dissous (DAF), un traitement biologique et une déshydratation des boues via une presse à bande pour respecter les limites de rejet et réduire les coûts de transport des boues. L'écorçage est un processus critique dans l'industrie du bois manufacturé. Avec un tamis à tambour rotatif, l'écorce peut être récupérée et vendue comme sous-produit ou utilisée comme combustible pour l'énergie de traitement. Notre tamis à tambour rotatif très durable est un excellent ajout au traitement dans cette industrie. Turnkey Solution System Solution

FRC Systems' FAQ section addresses common inquiries about their wastewater treatment solutions, including system capabilities, maintenance, and industry applications.

Learn about the Terms and Conditions of Purchase Orders with FRC Systems. Confidentialité JANUARY 2022 SULZER CHEMTECH USA, Inc. d/b/a FRC SYSTEMS INTERNATIONAL GENERAL TERMS AND CONDITIONS OF SALE These Terms and Conditions can be found on the Internet at https://frcsystems.com/terms Download A Copy 1. GENERAL 1.1 Definitions “BUYER” means an individual or entity which signs the CONTRACT documents as counterpart to SULZER CHEMTECH. “CONTRACT” means the PURCHASE ORDER plus all documents referred to therein. "DELIVERY TERM" shall have the meaning as established in the version of the INCOTERMS in place as of the effective date of the contract. “EFFECTIVE DATE” means the date of the ORDER CONFIRMATION. If BUYER expresses its objection to the ORDER CONFIRMATION within three (3) working days after receipt of the ORDER CONFIRMATION, EFFECTIVE DATE shall be the date on which BUYER and SULZER CHEMTECH reach common agreement on the CONTRACT. "END USER" shall have the same meaning as BUYER. However, if the BUYER and END USER are not the same individual or entity, then the term "END USER" shall mean the individual or entity for which the BUYER is obtaining the SCOPE OF SUPPLY. “ENGINEERING SERVICES” means engineering work included in the CONTRACT required to be carried out for the delivery of EQUIPMENT, FIELD SERVICES, STUDIES and such goods and or services offered. “EQUIPMENT” means skid mounted equipment, water and wastewater equipment, process and mass transfer, mixer or other equipment which is specified in the CONTRACT. “EX WORKS” means an Ex Works delivery as defined in the version of the INCOTERMS in place as of the effective date of the contract in effect as of the date of delivery. “Field Services” shall mean the deployment of SULZER personnel to a BUYER'S or END USER'S PLANT to provide technical assistance with specified maintenance, inspection, installation, repair and/or modification work or other services specified in the CONTRACT. “FINAL ACCEPTANCE” means the document issued by the BUYER or the END USER at the beginning of the warranty period or, if no FINAL ACCEPTANCE document is issued, then the document evidencing shipment of the goods or completion of the services. For consignment goods, FINAL ACCEPTANCE will take place at the date of removal of goods from stock, usually at the point of consumption. “GENERAL TERMS” means these General Terms and Conditions of Sale of SULZER CHEMTECH. “INSTALLATION Services” shall have the same meanings as “Field Services”. “ORDER CONFIRMATION” means the document provided by SULZER CHEMTECH to BUYER as a response to BUYER’S purchase order documents either by e-mail, facsimile or as a hardcopy. "PLANT" means the BUYER or END USER facility for which SULZER work is produced and/ or supplied or services provided. “PURCHASE ORDER” means the purchase order documents issued by BUYER in the version confirmed by SULZER CHEMTECH in the ORDER CONFIRMATION. In case of non-substantial deviations between said purchase order documents and the ORDER CONFIRMATION, the version of the ORDER CONFIRMATION shall become the binding PURCHASE ORDER unless BUYER expresses its dissent within three (3) working days after receipt of the ORDER CONFIRMATION. “SCOPE OF SUPPLY” means the goods and/or services to be delivered as specified in the CONTRACT and the pertaining documentation, to the extent explicitly specified in the PURCHASE ORDER and agreed upon by both parties. "SPARE PARTS" means wear and tear goods not otherwise falling under the definition of Equipment. “SULZER CHEMTECH” means the company doing business as (d/b/a) FRC Systems International and operating as a business unit under Sulzer Chemtech USA, Inc. 1.2 These GENERAL TERMS apply to all work provided by SULZER CHEMTECH except for the Sulzer Chemtech business related to disposable mixing devices. BUYER is hereby given notice that any deviations from these GENERAL TERMS are expressly rejected unless such deviations are otherwise agreed upon in a mutually signed document. The validity of offer is for a period of thirty (30) days commencing with the date of the offer, unless otherwise specified in writing by SULZER CHEMTECH. 1.3 The delivery encompasses the SCOPE OF SUPPLY and, unless otherwise mutually agreed in the PURCHASE ORDER, will be made EX WORKS. 1.4 In case of contradiction between CONTRACT documents, the following order of precedence shall apply: a) PURCHASE ORDER in the version accepted in the ORDER CONFIRMATION or other negotiated, agreed and mutually signed document, including all documents made a part thereof b) SULZER CHEMTECH’S offer c) These GENERAL TERMS d) BUYER’S request for an offer e) BUYER’S Purchase Terms and Conditions 1.5 All documents making part of the CONTRACT can be changed only by a written, duly signed document. 1.6 All information and data contained in brochures and price lists of SULZER CHEMTECH are only binding to the extent that they are by reference expressly included in the CONTRACT. 1.7 SULZER CHEMTECH shall be entitled to engage sub-suppliers for the performance of the CONTRACT. 2. DELIVERY 2.1 SULZER CHEMTECH shall deliver the SCOPE OF SUPPLY on the dates specified in the CONTRACT contingent upon BUYER fulfilling all contractual obligations, including but not limited to timely release of all input specifications, drawing approvals etc. 2.2 BUYER acknowledges and agrees that the delivery of the SCOPE OF SUPPLY may be delayed and re-scheduled in order to accommodate delays caused by: a) Events of Force Majeure as defined in this CONTRACT; b) Failure of BUYER or BUYER'S representative to timely make any required advance payments; c) Failure of BUYER or BUYER'S representative to timely provide; I. revised or additional specifications; II. approval drawings; or III. other items, documentation or materials necessary to complete the SCOPE OF SUPPLY. d) Any other reasons beyond SULZER CHEMTECH'S control 2.3 This CONTRACT shall be subject to termination at the option of BUYER for BUYER‘S convenience. In the event that this CONTRACT is terminated for the convenience of BUYER, SULZER CHEMTECH shall be paid: (1) the price of the goods or services properly supplied, provided, performed or in production up to the effective date of termination plus, (2) reasonable overheard and profit on such goods and services specified in clause #2.3.1 and (3) reimbursement for direct costs and expenses incurred by SULZER CHEMTECH as a result of BUYER's cancellation for convenience such as termination charges under subcontracts. In no event shall the amount payable to SULZER CHEMTECH exceed the total PURCHASE ORDER price, less any payments previously made. In addition to the preceding, the CONTRACT may be terminated by BUYER "for cause" in the event of a material breach of the terms and conditions by SULZER CHEMTECH which is not promptly cured. 2.4 SULZER CHEMTECH reserves the right to suspend production of the SCOPE OF SUPPLY or terminate this CONTRACT in the event that BUYER fails to provide any required advance payments and/or to issue Letter(s) of Credit as agreed in the PURCHASE ORDER within fourteen (14) days of the due date of the advanced payment or Letter(s) of Credit. In such event, SULZER CHEMTECH reserves the right to charge BUYER for all losses and damages suffered by SULZER CHEMTECH by reason of such default. 2.5 Unless otherwise expressly agreed in writing in a document signed by SULZER CHEMTECH, SULZER CHEMTECH shall not be subject to any claim for liquidated damages or penalties related to the late delivery of the SCOPE OF SUPPLY. In case the BUYER fails to timely fulfil any of its contractual obligations including failure to make payments on time or failure to take delivery when called upon to do so by SULZER CHEMTECH or failure to provide necessary infrastructure and facilities to commence the perform of the CONTRACT, SULZER CHEMTECH is entitled to terminate the CONTRACT. In this case BUYER shall pay to SULZER CHEMTECH the costs and expenses incurred by SULZER CHEMTECH connected with work or services performed prior to the date of termination, including a reasonable margin as well as other costs and expenses, including cancellation charges under subcontracts, as SULZER CHEMTECH may incur in connection with such cancellation. 2.6 Transfer of risk of loss of or damage to the SCOPE OF SUPPLY shall be in accordance with the applicable Incoterms. If dispatch is delayed at the request of the BUYER or due to other reasons beyond SULZER CHEMTECH'S control, the risk of loss of the SCOPE OF SUPPLY shall pass to the BUYER at the original time the SCOPE OF SUPPLY was scheduled to leave SULZER CHEMTECH'S manufacturing facility. From this moment on, the SCOPE OF SUPPLY shall be stored and insured on the account and at the risk of the BUYER. Title and ownership shall be transferred to BUYER upon receipt of payment in full by SULZER CHEMTECH. 3. PRICE AND PAYMENT 3.1 The prices for the SCOPE OF SUPPLY are those stated in the CONTRACT and are fixed and firm until fulfillment of CONTRACT. For work carried out on a time basis, the prices shall be determined in accordance with the hourly rates specified in the CONTRACT. If no agreement on hourly rates has been made, the hourly rate applied by SULZER CHEMTECH for other customers and comparable work shall apply. All prices are exclusive of excise duties, VAT, sales or similar taxes and duties. 3.2 Unless otherwise agreed in writing, full payment for the SCOPE OF SUPPLY shall be due within thirty (30) days of issue of an invoice by SULZER CHEMTECH. 3.3 If BUYER disputes any item or charge listed in the invoice, BUYER shall state the item or amount of the charge in dispute and the reasons for such dispute in writing within such thirty (30) day time period. However, all undisputed amounts shall remain due as specified above. 3.4 At SULZER CHEMTECH’S discretion, an interest charge of six percent (6%) per annum will be charged against any outstanding balance effective as of the due date of the balance. 3.5 Unless otherwise agreed in writing, all uncontested payments shall be made according to the agreed terms of payment without any deductions for discounts, set-offs or otherwise. 3.6 To the extent permitted by law, BUYER hereby grants SULZER CHEMTECH a security interest in the SCOPE OF SUPPLY sold hereunder (together with all accessories, attachments and accessions now and hereafter affixed thereto and all substitutions, replacements and all proceeds thereof) as of the date hereof and hereafter to secure the payment of the purchase price thereof and all charges related thereto and authorizes SULZER CHEMTECH to file financing statements (and other such instruments) with appropriate local and state authorities. SULZER CHEMTECH reserves the right to change the credit terms provided herein when, in SULZER CHEMTECH's opinion, the financial condition or previous payment record of BUYER so warrants. Should BUYER become delinquent on the payment of any sum due hereunder, SULZER CHEMTECH will not be obligated to continue performance. Further, in case of late payment, SULZER CHEMTECH may, after having notified the BUYER in writing, suspend its performance of the SCOPE OF SUPPLY until the open and due invoices have been paid. 3.7 If BUYER and SULZER CHEMTECH agreed on issuing a Letter of Credit by BUYER in favor of SULZER CHEMTECH, such Letter of Credit shall be irrevocable, unconditional, and issued by a first class worldwide active bank. The Letter of Credit shall remain valid until the delivery of the entire of SCOPE OF SUPPLY plus ninety (90) days. SULZER CHEMTECH reserves the right to approve the issuing bank. Withdrawal of the money shall be against the documents that are mutual-ly agreed upon in writing. 4. INTELLECTUAL PROPERTY 4.1 BUYER shall provide the technical documentation (e.g. up-to-date drawings, descriptions, charts, instructions, etc.) that is necessary for the delivery of the SCOPE OF SUPPLY and is specified in the CONTRACT. BUYER confirms that BUYER is fully authorized to use (or have used) the technical documentation provided to SULZER CHEMTECH for the performance of the SCOPE OF SUPPLY by SULZER CHEMTECH or its sub-suppliers, respectively. In case BUYER would not be authorized to order said performance from SULZER CHEMTECH without violation of intellectual property rights of third parties, or if such right should be chal-lenged, BUYER shall inform SULZER CHEMTECH without any delay. In this case, SULZER CHEMTECH shall stop the work until the approvals needed for the performance have been obtained. 4.2 Each party to the CONTRACT retains all rights to any technical documents provided to the other party. The party receiving such documents recognizes these rights and shall, without previous written consent of the other party, not make these documents available to any third party, either in whole or in part, nor use them for any purpose other than to fulfill the CONTRACT. 4.3 Any know-how, inventions, patents or copyrights or the like belonging to or provided by SULZER CHEMTECH and used for or developed in the course of the fulfillment of the CONTRACT by SULZER CHEMTECH shall remain SULZER CHEMTECH’S property, and no ownership shall be transferred to BUYER with respect to such know-how, inventions, patents and copyrights, independent of the hardware on which such know-how, inventions, patents or copyrights is made available (machinery, paper, electronic medium, etc.). However, BUYER shall be granted a limited right to use such know-how, invention, patents, copyright or the like for the operation, maintenance and repair of the SCOPE OF SUPPLY on a non-exclusive basis, which right shall not include the use of the said intellectual property for the reproduction of the SCOPE OF SUPPLY or parts thereof. If the SCOPE OF SUPPLY consists of ENGINEERING SERVICES, BUYER shall be permitted to use, on a non-exclusive basis, the documentation received for the purpose described in the CONTRACT. In case of doubt, ENGINEERING SERVICES provided for the development or construction of EQUIPMENT shall be deemed to be made available for the procurement of such goods from SULZER CHEMTECH solely. 4.4 To the best knowledge of SULZER CHEMTECH the SCOPE OF SUPPLY and any part thereof, in the particular form sold by SULZER CHEMTECH, shall not infringe any intellectual property rights of third parties. In the event of any patent infringement relating to the said SCOPE OF SUPPLY, SULZER CHEMTECH may, in its sole discretion, procure the right to use the SCOPE OF SUPPLY without impairing its suitability, or modify or replace it so that it is rendered non-infringing. The obligations of SULZER CHEMTECH set forth herein are contingent upon (i) SULZER CHEMTECH receiving prompt written notice from BUYER of such infringement; (ii) SULZER CHEMTECH receiving assistance from BUYER in the defense; and (iii) the right of SULZER CHEMTECH to settle or defend. 4.5 The obligation under 4.4 above of SULZER CHEMTECH shall not apply to (i) the SCOPE OF SUPPLY or part thereof which has been manufactured according to BUYER'S design, (ii) services performed by using BUYER’S documentation, (iii) the use of the SCOPE OF SUPPLY or any part thereof in conjunction with any other product in a combination not furnished by SULZER CHEMTECH as part of the SCOPE OF SUPPLY, (iv) to products fabricated by using the SCOPE OF SUPPLY. As to any such equipment, service, product, part or use in such combination, SULZER CHEMTECH assumes no liability whatsoever for infringement of intellectual property rights of third parties, and BUYER shall indemnify and hold harmless SULZER CHEMTECH against any respective infringement claims. SULZER CHEMTECH shall cooperate with BUYER in the same manner as required by SULZER CHEMTECH under 4.4 (i) to (iv) herein above. 4.6 SULZER CHEMTECH’S copyrighted material shall not be copied by BUYER except for archiving purposes or to replace a defective copy. 5. INSTALLATION AND SITE PREPARATION 5.1 If installation services are a part of the SCOPE OF SUPPLY, it is the responsibility of the BUYER to prepare the site environmentally and to provide the required services, electrical wiring and conduit, dry compressed air and piping, gas supply and piping, tools for installation, water drain, permits, including work permits, licenses, approvals, etc. as well as whatever is required to uncrate and move the equipment to its location. 5.2 BUYER also undertakes to maintain the facilities upon which SULZER CHEMTECH’S personnel may be required to enter, in a safe condition, and to comply with all applicable laws, statutes and regulations governing workplace health and safety, and to give SULZER CHEMTECH’S personnel all instructions necessary. SULZER CHEMTECH shall make sure that its personnel will follow all instructions reasonably made by BUYER. The same applies vice versa in case BUYER’S personnel have to enter upon SULZER CHEMTECH’S facilities. 5.3 BUYER’S failure to comply with the obligations stated in Articles 5.1 and 5.2 above shall entitle SULZER CHEMTECH to either stop rendering its services, and/or postpone the delivery, and/or ask for additional charges for the lost time of its service personnel, such time to be calculated and charged in accordance with Article 3. 6. WARRANTY Articles 6.1 through 6.4 contain specific warranties referring to various SCOPES OF SUPPLY. Only the warranty provision(s) referring to a specific SCOPE OF SUPPLY shall apply. 6.1 EQUIPMENT a) SULZER CHEMTECH shall remedy any defect arising within twelve (12) months from the date of initial operation of the EQUIPMENT or eighteen (18) months from the date of shipment, and, if dispatches, erection, supervision of erection and/or commissioning are delayed due to reasons beyond SULZER CHEMTECH'S control, the warranty period shall end not later than eighteen (18) months after notification that the EQUIPMENT is ready for dispatch (whichever date shall occur first). This warranty shall apply to defects resulting from faulty materials or faulty workmanship. Additionally, to the extent SULZER CHEMTECH has provided the design for the EQUIPMENT, this warranty shall also apply to defects resulting from faulty design. b) If requested to do so by BUYER in writing, and as BUYER’S sole and exclusive remedy, SULZER CHEMTECH agrees to, at its sole option, either repair or replace the faulty parts of the EQUIPMENT, or supply BUYER with nondefective EQUIPMENT or part thereof. These remedies shall be provided for the defects notified to SULZER CHEMTECH during the warranty period under the conditions defined in Article 6.5 herein. c) The warranty period for any EQUIPMENT which is repaired or replaced shall be for a period of twelve (12) months or the remainder of the original warranty period, whichever period is longer. 6.2 FIELD SERVICES a) SULZER CHEMTECH warrants that the FIELD SERVICES will be performed as specified in the CONTRACT and will comply with applicable industry standards and practices. SULZER CHEMTECH shall remedy any defect arising within ninety (90) days from the date of completion of the FIELD SERVICES work and which are resulting from faulty workmanship performed by SULZER CHEMTECH. Defects resulting from insufficient or inappropriate documentation delivered by BUYER shall be remedied at BUYER’S cost. b) If requested to do so by BUYER in writing, and as BUYER’S sole and exclusive remedy, SULZER CHEMTECH shall at its sole option repair the defective FIELD SERVICES or reperform such FIELD SERVICES. These remedies shall be provided for the defects notified to SULZER CHEMTECH during the warranty period under the conditions defined in Article 6.5 herein. c) All FIELD SERVICES work which is remedied shall be warranted for a period of ninety (90) days from the date of the completion of repair or reperformance. d) SULZER CHEMTECH shall bear the costs for the corresponding repair or the reperformance of work whether occurring at the SULZER CHEMTECH or BUYER or END USER facility to the extent that they are reasonable under the circumstances. BUYER or END USER shall grant SULZER CHEMTECH the first opportunity to remedy any defect in the FIELD SERVICES. If the BUYER or END USER has obtained the services of a third party to perform the FIELD SERVICES, SULZER CHEMTECH shall bear the costs for the corresponding repair or reperformance work provided that the BUYER or END USER has obtained SULZER CHEMTECH’S prior written approval. 6.3 ENGINEERING SERVICES a) SULZER CHEMTECH’S obligations consist of using proper care and skills in performing the work described in the CONTRACT. Unless otherwise explicitly agreed upon in writing, SULZER CHEMTECH shall not provide any warranty for successful achievement of the results envisaged in the CONTRACT. Defects arising from faulty ENGINEERING SERVICES arising within six (6) months from completion thereof shall be reperformed by SULZER Chemtech at its own cost. b) The warranty period for any engineering services which have been reperformed under the warranty shall be for a period of six (6) months. 6.4 Performance Guarantee Unless explicitly agreed upon in writing in the CONTRACT, SULZER CHEMTECH shall not provide performance guarantees. 6.5 General Conditions applicable to SULZER CHEMTECH’S Warranty a) Maximum Extension of Warranty Period The warranty period for any part of the SCOPE OF SUPPLY which is repaired or replaced shall be for the applicable period specified under 6.1 through 6.3 or the remainder of the original warranty period, whichever period is longer. Under no circumstances shall the repaired, replaced or reperformed warranty period extend for a period of time which is greater than 50% of the original period. b) Inspection of Equipment and Services BUYER shall ensure that inspection of SULZER CHEMTECH'S SCOPE OF SUPPLY and the issuance of a written notice of FINAL ACCEPTANCE shall occur within seven (7) days of receiving SCOPE OF SUPPLY. If a written notice of FINAL ACCEPTANCE is not received, then FINAL ACCEPTANCE will be deemed to have occurred fourteen (14) days after BUYER or END USER has received SULZER CHEMTECH'S EQUIPMENT or ENGINEERING SERVICES or fourteen (14) days after the completion of SULZER CHEMTECH'S FIELD SERVICES. c) Place where Warranty Work will be executed SULZER CHEMTECH reserves the right to require that BUYER or END USER return the SCOPE OF SUPPLY or parts thereof to SULZER CHEMTECH’S production facility to provide proper warranty service. In such cases, SULZER CHEMTECH shall reimburse BUYER or END USER for the reasonable costs paid for sea or land transportation of the SCOPE OF SUPPLY. If the return of the SCOPE OF SUPPLY to SULZER CHEMTECH'S production facility is not required, then SULZER CHEMTECH shall use its best efforts to perform the warranty work at BUYER’S or END USER’s facility, and as soon as reasonably practicable after receipt of written notification by the BUYER or the END USER. BUYER or END USER shall make the SCOPE OF SUPPLY available for SULZER CHEMTECH to repair or replace. SULZER CHEMTECH shall not be responsible for the disassembly, removal or reinstallation of the SCOPE OF SUPPLY. d) Early termination of Warranty Period The warranty periods stipulated in 6.1 through 6.3 above shall terminate if BUYER or a third party undertake inappropriate or improper modification or repairs, or if the BUYER, in case of a defect, does not as soon as reasonably possible take appropriate steps to mitigate damages and to notify SULZER CHEMTECH in writing of its obligation to remedy such defect. e) Exclusion from SULZER CHEMTECH’S Warranty Excluded from SULZER CHEMTECH’S warranty and liability for defects are all deficiencies which cannot be proved to have their origin in bad material, faulty design (if applicable), or poor workmanship. Also excluded from SULZER CHEMTECH’S warranty and liability for defects are deficiencies resulting from normal wear and tear, improper maintenance, failure to observe the operating instructions provided by SULZER CHEMTECH or deficiencies resulting from other reasons beyond SULZER CHEMTECH’S control, including damages caused by erosion or corrosion. For supplies and services of those subcontractors prescribed by the BUYER, SULZER CHEMTECH assumes warranty, guarantee and/or liability for defects only to the extent that such subcontractors assumed warranty, guarantee and/or liability obligations in its contract with SULZER CHEMTECH. f) Dismantling and Reassembly To the extent necessary to remedy the defect, BUYER or END USER shall, at their own expense, arrange for any dismantling and reassembly of EQUIPMENT. g) No Additional Warranties or Representations SULZER CHEMTECH MAKES NO WARRANTY OR REPRESENTATION TO THE SCOPE OF SUPPLY OTHER THAN AS SPECIFIED IN THIS SECTION. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED. 6.7 Hazard Warning Responsibility BUYER and SULZER CHEMTECH acknowledge that each have respective obligations with respect to maintaining compliance with all safety and health related regulations concerning SCOPE OF SUPPLY. BUYER is familiar with the SCOPE OF SUPPLY and acknowledges its separate and independent knowledge of such risks, which are known in BUYER'S industry. BUYER shall maintain compliance with all safety and health related governmental requirements concerning SCOPE OF SUPPLY and shall take all reasonable and practical steps to inform, warn, and familiarize its employees, agents, contractors, and customers with all hazards associated therewith, including handling, shipment, storage, use, and disposal. BUYER assumes as to its own employees, its independent contractors, and subsequent purchasers of the SCOPE OF SUPPLY sold hereunder, all responsibility for any and all necessary warnings or other precautionary measures. BUYER shall defend at its own expense, indemnify fully and hold harmless SULZER CHEMTECH and its parents, subsidiaries, and affiliates and its and their agents, officers, directors, employees, representatives, successors, and assigns from and against any and all liabilities, losses, damages, demands, claims, penalties, fines, actions, suits, legal, administrative or arbitration proceedings, judgments of any jurisdiction, costs and expenses (including, but not limited to, attorney’s fees and related costs) arising out of or in any manner related to BUYER'S failure to provide necessary warnings or other precautionary measures in connection with the SCOPE OF SUPPLY sold hereunder. 7. OVERALL LIMITATION OF LIABILITY NOTWITHSTANDING ANYTHING TO THE CONTRARY IN THE CONTRACT, INCLUDING ALL DOCUMENTS FORMING A PART OF THE CONTRACT AND TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL SULZER CHEMTECH BE LIABLE TO THE BUYER OR ITS CUSTOMER FOR ANY LOSS OF PROFIT, LOSS OF CONTRACTS OR EARNINGS, INTERRUPTION OR LOSS OF PRODUCTION OR LOSS OF USE OR LOSS OF OPPORTUNITY, DELAY IN DELIVERY OR CLAIMS BY THE BUYER'S CUSTOMER FOR SUCH DAMAGES OR BUSINESS, INDIRECT, INCIDENTIAL OR CONSEQUENTIAL DAMAGES, WHETHER SUCH LIABILITY IS BASED ON CONTRACT, INDEMNITY, TORT (INCLUDING NEGLIGENCE), STATUTE OR ANY OTHER BASIS OF LEGAL LIABILITY. THE REMEDIES OF BUYER SET FORTH HEREIN ARE EXCLUSIVE, AND SULZER CHEMTECH'S LIABILITY WITH RESPECT TO ANY CONTRACT OR SALE OR ANYTHING DONE IN CONNECTION THEREWITH, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), UNDER ANY WARRANTY, STRICT LIABILITY OR OTHERWISE SHALL IN TOTAL NOT EXCEED 100% OF THE CONTRACT PRICE TO BE PAID TO SULZER CHEMTECH, UNLESS CLAIMS ARISE DIRECTLY FROM GROSS NEGLIGENCE OR WILFUL MISCONDUCT OF SULZER CHEMTECH. 8. EXPORT AND OTHER GOVERNMENTAL DOCUMENTS 8.1 SULZER CHEMTECH undertakes to provide the documents required by the authorities at SULZER CHEMTECH’S place for the manufacturing and transportation EX WORKS of the SCOPE OF SUPPLY. 8.2 BUYER undertakes to provide all other documents required, e.g. documents required by an authority at BUYER’S or BUYER’S customer’s place, or the place where the SCOPE OF SUPPLY will be used. 8.3 SULZER CHEMTECH, BUYER and END USER shall support and assist each other without undue delay with obtaining any necessary information or documentation required by any authority in connection with the CONTRACT. SULZER CHEMTECH'S acceptance of the CONTRACT shall be subject to the receipt of all necessary export authorizations required from any governmental authority which has jurisdiction over this CONTRACT. 8.4 The BUYER hereby represents and warrants that it is, and will remain in compliance with the requirements of all applicable export laws and regulations, including but not limited to the U.S. Export Administration Regulations and International Traffic in Arms Regulations. Such requirements include, but are not limited to obtaining all required authorizations or licenses for the export or reexport of any controlled item, product, article, commodity, software or technology. Without limiting the generality of the foregoing, the BUYER hereby represents and warrants that it has not been, and is not currently, debarred, suspended or otherwise prohibited or restricted from exporting, reexporting, receiving, purchasing, processing or otherwise obtaining any item, product, article, commodity, software or technology regulated by any agency of the United States or any other state. The BUYER agrees to indemnify and hold harmless SULZER CHEMTECH from any costs, penalties or other losses caused by, or related to, any violation or breach of the warranties contained in this provision. 9. FORCE MAJEURE 9.1 SULZER CHEMTECH shall not be liable for any non-performance, loss, damage, or delay due to acts of God such as but not limited to severe weather conditions, fire, flood or war, riots, strikes or labor difficulty, governmental acts such as but not limited to trade restrictions including embargoes, acts of the BUYER or END USER, delays in transportation, inability to obtain necessary labor or materials from usual sources, or other causes beyond the reasonable control of SULZER CHEMTECH. In the event of delay in performance due to any such cause, the date of delivery or time for completion will be extended to reflect the length of time lost by reason of such delay. If the grounds for Force Majeure continue for more than six (6) months, either SULZER CHEMTECH or BUYER may terminate the CONTRACT upon seven (7) days' written notice to the other party. 9.2 SULZER CHEMTECH shall be entitled to be compensated for the extra costs caused by the interruption, or, in case of termination, for the work done prior to termination and the expenses for non-cancelable procurements. BUYER shall be entitled to receive the work for which it has paid. 10. FREE ISSUE MATERIALS Materials supplied by BUYER to SULZER CHEMTECH (e.g. samples to be processed or tested, product for usage in performance tests, materials to be used for implementation in the SCOPE OF SUPPLY, etc.) shall at all times remain the property of BUYER and shall be sufficiently covered under BUYER’S property insurance policy. Subject to Article 6 and 7 hereinabove, SULZER CHEMTECH shall be solely liable for damages caused by gross negligence or willful misconduct to FREE ISSUE MATERIALS. 11. MISCELLANEOUS 11.1 Applicable Laws and Jurisdiction a) The CONTRACT shall be construed and shall be interpreted in accordance with the laws of the State of Delaware without application of any conflict of law rules. b) Nothing contained in this CONTRACT shall limit the rights of SULZER CHEMTECH available under the applicable law. c) In case of a dispute, the parties shall make their best efforts to resolve such dispute amicably. If an amicable resolution should not be possible, the resolution of the dispute shall be conducted in either a Federal or State court of competent jurisdiction. 11.2 Assignment Any attempt to assign, transfer, or delegate any of the rights, duties or obligations herein to a third party without prior written consent of the other party shall render such attempted assignment or transfer null and void. SULZER CHEMTECH’S affiliated companies shall not be considered third parties for this purpose. 11.3 Waiver of Rights SULZER CHEMTECH’S or BUYER’S failure to exercise any of its rights shall not constitute or be deemed a waiver or a forfeiture of such rights. 11.4 Severability If a provision of the CONTRACT is determined to be void or unenforceable, this finding shall not render other provision void or unenforceable, and SULZER CHEMTECH and BUYER shall make their best endeavors to replace such provision by a valid one covering the original commercial intention as far as legally possible. Download a Copy of Our Terms & Conditions

FRC Systems Privacy Policy. Read through this page to learn about the FRC Privacy Policy. Confidentialité

Ready to register for IPPE? Fill out the form and we'll do the rest. Get Your Complimentary IPPE Pass! Kindly fill out this form and we'll send you a promo code for a complimentary IPPE 2025 ticket! First name* Last name* Email* Phone* Company name* Position Disclaimer: the complimentary pass must be used by the recipient or colleague of this email message. Submit Products Project Archive

Learn more about the vendor terms and condition for FRC Systems. Confidentialité December 20, 2024 SULZER CHEMTECH USA, Inc. d/b/a FRC SYSTEMS INTERNATIONAL PURCHASE ORDER TERMS & CONDITIONS These Terms and Conditions can be found on the Internet at https://frcsystems.com/vendor-terms Download A Copy 1. Governing Provisions. Sulzer Chemtech USA, Inc.’s d/b/a FRC Systems International’s (hereinafter “Buyer”) Purchase Order shall consist of (i) the terms and conditions set forth herein and (ii) all attachments, exhibits, specifications, drawings and other related documents which refer to, are attached to or are otherwise referenced in these Purchase Order Terms and Conditions ("Purchase Order"). Each shipment received by Buyer from Seller shall be deemed to be only upon the terms and conditions contained in this Purchase Order, except as they may be added to, modified, superseded, or otherwise altered in writing by Buyer, notwithstanding any terms and conditions that may be contained in any acknowledgment, invoice or other form of Seller and notwithstanding Buyer's act of accepting or paying for any shipment or any similar act of Buyer and Buyer hereby rejects any different or additional terms and conditions proposed by Seller. If this Purchase Order is sent to Seller in response to a quotation or an offer of Seller submitted to Buyer, the terms of this Purchase Order shall supersede and control all provisions in the quotation or offer of Seller. Seller's shipment of any of the goods or performance of any of the services covered by this Purchase Order, or Seller's receipt of any payment made pursuant to this Purchase Order, shall constitute Seller's acceptance of this Purchase Order as fully as if Seller had accepted in writing. 2. Conforming Goods. All goods shall conform strictly to the description, plans, specifications, and sample, if any, and no deviation or substitution will be permitted without the express written agreement of Buyer. Unless otherwise expressly agreed in writing by the Buyer, all Seller goods shall be new, of the latest design or model conforming to the Buyer’s requirements, and of the best quality. 3. Inspection and Expediting. Buyer and Buyer's customer shall have the right to inspect and expedite the goods in process of manufacture, in storage or in transit. The Seller shall afford the Buyer representative free of cost, all necessary and commercially reasonable access to Seller's facilities for such purposes and for purposes of confirming that the Seller's goods are being furnished in accordance with this Purchase Order. Upon delivery, Buyer shall be granted a commercially reasonable opportunity to confirm compliance with all terms, conditions, specifications and drawings, if any. 4. Delay and Force Majeure. Seller acknowledges that compliance with the delivery schedule shall constitute a material requirement of this Purchase Order. Either party shall be excused from performance of the obligations hereunder when and to the extent that such performance is delayed or prevented by any circumstances reasonably beyond its control, including but not limited to, fire, explosion, acts of terrorism, any strike or labor dispute or any act or omission of any governmental authority or any group purporting to have authority (hereinafter, individually or collectively “Force Majeure”). To be so excused, the affected party must provide prompt notice and undertake reasonable efforts to mitigate the conditions giving rise to a claim of Force Majeure. 5. Title. Title to all goods covered by this Purchase Order and to all materials, work in progress, design data and other documentation, and all contract rights related to such goods, shall vest in Buyer immediately upon identification to this Purchase Order, subject to Buyer’s obligation to pay the purchase price thereof and perform all its corresponding obligations hereunder. Irrespective of vesting of title, Seller shall bear the risk of loss, and shall insure or self-insure at full replacement value, all goods of Buyer in its care, custody or control until delivery of the goods in good condition in accordance with the shipping provisions. Seller warrants good title free of claims or encumbrances shall be vested in Buyer. 6. Payments. Unless otherwise agreed in writing, payment to Seller shall be due net ninety (90) days from Buyer's receipt of an acceptable invoice. Seller agrees to pay promptly when due, all bills for any labor, materials, equipment, or service connected with the goods supplied hereunder, and, if not promptly paid when due, Buyer may pay any such valid obligation of Seller and Seller shall immediately reimburse Buyer therefor. 7. Compliance With Laws, Codes and Standards. Seller agrees to observe and comply with all applicable codes, laws, rules and regulations of any governmental entity having jurisdiction over Seller in the performance of its work pursuant to this Purchase Order. To the extent applicable, Seller agrees that the services rendered in connection herewith shall meet applicable safety standards established and promulgated under the Federal Occupational Safety and Health Act (OSHA) and its regulations in effect as of the date hereof, and as of the date of performance of any work hereunder. 8. Assignment. This Purchase Order and money due under this Purchase Order may not be assigned without prior written consent of Buyer. 9. Rejection. There shall be no substitutes or shipment of more or less than the quality specified without prior written approval of Buyer. If goods received do not conform to those ordered, or if more or less than the quantity ordered are shipped, Buyer may reject such shipment in whole or in part and require Seller to pick up and remove such rejected goods at Seller’s expense within ten days after notice. 10. Cancellation. This Purchase Order is subject to cancellation at the option of Buyer for Buyer's convenience. In the event that this Purchase Order is cancelled for the convenience of Buyer, Seller shall be paid: (1) the unit price of each item of the goods properly furnished and accepted prior to cancellation or completion of performance by Seller, plus, (2) the unit price for finished goods not yet delivered to Buyer, plus, (3) other direct cost incurred by Seller as a result of Buyer's cancellation for convenience such as termination charges under subcontracts. In no event shall the amount payable to Seller exceed the total Purchase Order price, less any payments previously made. In addition to the preceding, this Purchase Order may be terminated by Buyer "for cause" in the event of breach of the Purchase Order terms and conditions by Seller, or a Seller bankruptcy or insolvency, or failure or inability of Seller to perform. In the event of a "for cause" termination, Buyer agrees to pay Seller the unit price of each item of goods properly furnished and accepted prior to cancellation or completion of performance by Seller. In no event shall the amount payable exceed the Purchase Order price, less the cost to Buyer of completion or procurement of substitute conforming goods and less any payments previously made. Upon notice to Seller, Buyer reserves the right to offset any liability of Seller owed to Buyer whether such liability arises in connection with this Purchase Order or any other agreement between the parties. Such offset shall be without waiver or limitation of any other rights or remedies of Buyer. 11. Changes. Changes may be made by Buyer in the character or quantity of goods to be furnished hereunder, by change order in writing signed by the Buyer. The price shall be equitably adjusted, for any such change, at the unit prices set forth herein if the change is in quantity, or by agreement if the character of the goods or other terms are changed so as to increase or decrease the cost to Seller. If no agreement is reached as to amount of the price adjustment, the price shall be equitably adjusted to reflect the increased or decreased cost to Seller with reasonable allocation of overhead and profit. Seller shall submit to Buyer all satisfactory evidence from which adjustments based on cost can be determined. 12. Warranty. Seller warrants that the goods or services supplied will be free from defects in material, workmanship, and design, and will conform to specifications, drawings and to applicable industry codes and standards. Seller shall repair any defective goods or furnish replacement goods or parts thereof, or reperform services to Buyer’s satisfaction, at Seller’s expense. The warranties of the Seller, together with its service warranties and guarantees, if any, shall run to the Buyer and its customers. 13. Shipping. Goods shall be shipped by carriers and routes as instructed by Buyer. Seller agrees to pay for packing, loading, and draying, unless otherwise agreed in writing. Invoices and bills of lading showing full routing, car number and other customary data, etc., shall be dated and mailed at the time of shipment and separate invoice must be made for each destination, showing point of shipment and how shipped. Invoices bearing transportation charges must show weight and rate. 14. Prices. If price is omitted on this Purchase Order it is agreed that Seller’s price will be the last quoted. 15. Indemnity. Seller agrees to defend, indemnify and hold harmless Buyer and the Owner and its employees, agents and subcontractors, against any loss, cost, damage or liability, including attorney’s fees, arising from the negligence or other breach of duty by Seller and those for whom it is responsible in connection with the Purchase Order or the goods or services supplied hereunder. 16. Subcontracts. If the Seller shall cause any part of the work to be performed by a subcontractor, the provisions of this Purchase Order shall apply to such subcontractor and the Seller shall not, in any manner thereby, be discharged from its obligations and liability hereunder, but shall be liable hereunder for all acts and omissions of the subcontractor, or its officers, agents and employees as if they were employees of the Seller. No subcontractor shall be used until written approval is given by Buyer or its customer but no such approval shall affect the provision hereof with respect to Seller’s responsibilities and obligations. 17. Sales and Similar Taxes. Unless otherwise agreed in writing, Buyer acknowledges that Seller’s price does not include sales, use, excise, value added, or similar taxes or customs duties (“Taxes”). Seller shall clearly set forth in its invoice to Buyer any such Taxes not included in Seller's prices. Notwithstanding the preceding, Seller shall assume exclusive responsibility for, and shall pay before delinquency, all taxes, assessments and such other charges with respect to, or measured by wages, salaries, or other remuneration paid to persons employed by Seller in connection with the performance of the Purchase Order. 18. Insurance. During the performance of this Purchase Order, the Seller shall maintain insurance in effect for its own protection and protection of its subcontractors. In the event that Seller is scheduled to provide on-site services in connection with this Purchase Order, then Seller shall provide Buyer at the time of executing this Purchase Order a Certificate of Insurance indicating that the insurance has been secured and that Buyer has been named as an additional insured on such policies. Buyer shall be given 30 days written notice prior to cancellation or significant changes. 19. Jurisdiction. This Purchase Order shall be construed and enforced according to the laws of the State of Delaware, excluding its conflicts of law principles. 20. Confidential Information. Seller acknowledges and agrees that any information and/or materials that Seller or its personnel shall receive either directly from Buyer or indirectly from a Buyer employee, agent or subcontractor shall be kept in strictest confidence and agrees to limit access to such information to only those of its respective employees who reasonably require access to such information to perform the work contemplated by this Purchase Order. Except as may otherwise be set forth herein, any information disclosed in connection with this Purchase Order shall not be disclosed to any third parties without Buyer's express prior written consent. 21. Intellectual Property Ownership. Neither Seller, nor Buyer shall acquire any right, title, or interest in or to any pre-existing intellectual property (including without limitation patents, copyright and trade secrets) of the other Party in connection with this Purchase Order. 22. Complete Agreement. This Purchase Order is the complete agreement between the parties and no modification, amendment, rescission, waiver or other change will be binding on any party unless assented to in writing by such party's authorized representative. Any oral or written representation, warranty, course of dealing or trade usage not contained or referenced herein will not be binding on any party. Both parties agree that they have not relied on, nor were induced by any representation not contained in this Purchase Order.

Contact FRC Systems for any type of request including general questions, wastewater systems and parts. Have questions or need support? Our team is here to assist with your inquiries and solutions. Sales & Support Team Directory Or use the form below for: General Questions Wastewater System Requests Parts Requests

FRC was founded in 1979 as a provider of wastewater treatment equipment to the food processing industry. Systèmes FRC » À propos de FRC Systems Solutions pour le traitement et la gestion des eaux usées Annuaire de l'équipe Archives du projet Produits Depuis près de 50 ans, FRC Systems a livré des milliers d’installations de systèmes dans le monde entier. FRC a été fondée en 1979 en tant que fournisseur d'équipements de traitement des eaux usées pour l'industrie agroalimentaire. Au cours des deux décennies suivantes, FRC est devenue le principal fournisseur de systèmes de flottation à air dissous (DAF) pour de nombreuses grandes entreprises de l'industrie agroalimentaire. À partir de là, FRC a commencé à étendre ses services à la fabrication générale, au pétrole et au gaz et aux applications municipales. En 2008, FRC Environmental a été rebaptisée FRC Systems International afin de mieux refléter la portée mondiale croissante de FRC. Notre champ d'action s'est élargi pour inclure les cribles, la déshydratation des boues, les systèmes de traitement biologique, le réacteur biologique à lit mobile (MBBR), le bioréacteur à membrane (MBR) et les boues activées en continu (CWAS). Aujourd'hui, FRC fait partie de la division Chemtech de Sulzer, où nos clients bénéficient de l'attention dédiée de notre équipe d'experts soutenue par les ressources mondiales de Sulzer. Pourquoi choisir les systèmes FRC ? Expérience et savoir-faire en matière d'application Nos équipes de conception et d’ingénierie sont dirigées par des spécialistes hautement reconnus dans le domaine du traitement des eaux usées, possédant en moyenne plus de 25 ans d’expérience dans le secteur. Attention personnelle Chaque projet bénéficie d’une attention individuelle tout au long du processus de la part d’un chef de projet dédié et d’une équipe de nos ingénieurs expérimentés. Axé sur le client Tous nos systèmes sont conçus pour répondre à un défi spécifique. Nous nous concentrons sur les objectifs du client dès le début du processus de conception jusqu'à l'installation et la mise en service. Notre objectif n'est pas seulement de créer un système qui fonctionne, mais un système qui fonctionne pour vous. Une qualité à laquelle vous pouvez faire confiance Le processus de conception FRC comprend des soumissions professionnelles avec des dessins 3D détaillés pour approbation avant la fabrication. Nos produits sont construits à l'aide d'une fabrication et d'un assemblage en acier inoxydable découpés au laser pour assurer un contrôle de la qualité.

Check out FRC Systems LinkedIn feed. Catch up on all the latest news from FRC Systems. Feed

A jar test provides a simple and effective qualitative test to determine a combination that results in effective solids removal with DAF treatment. Systèmes FRC » Services Test de jarre Solutions pour le traitement et la gestion des eaux usées Liens rapides Processus de test FRC Jar Coagulation Floculation Simulation DAF Test des boues FRC peut recommander les produits chimiques de prétraitement appropriés. Un test en jarre FRC Systems fournit un test qualitatif simple et efficace dans lequel nous ajoutons divers produits chimiques coagulants et/ou floculants à vos échantillons d'eaux usées afin de déterminer une combinaison qui entraîne une élimination efficace des solides avec un traitement par flottation à air dissous (DAF). Nous proposons également des tests analytiques facultatifs pour les échantillons traités et non traités, notamment les solides en suspension totaux (TSS), les graisses, les huiles et les graisses (FOG), la demande biochimique en oxygène (DBO), la demande chimique en oxygène (DCO) et bien d'autres. Sur la base des résultats du test en jarre, FRC peut recommander les produits chimiques de prétraitement appropriés à discuter avec votre fournisseur de produits chimiques. Les coagulants seront sélectionnés en fonction de l'application, des caractéristiques des eaux usées et des options d'élimination des boues. Coagulation Il s'agit d'un processus purement chimique qui implique la déstabilisation de particules colloïdales formant des micro-flocs avec une charge positive. Nous déterminons la rapidité avec laquelle les micro-flocs peuvent se former pour sélectionner le produit FRC approprié. Au cours de cette étape, nous pouvons déterminer une recommandation de dosage préliminaire. Floculation Le floculant est un polymère qui attire les micro flocs de charge opposée et les agglomère en « macro flocs » plus gros. Cela permet d'obtenir une taille adaptée à la séparation dans la cellule de flottation. Les polymères peuvent être anioniques, cationiques ou non ioniques. Simulation DAF Dans cette étape, nous générons de l'eau blanche en pressurisant l'eau dans un récipient dédié. Nous injectons l'eau blanche générée dans l'échantillon d'eaux usées pour observer comment l'air dissous interagit avec les macro-flocs précédemment formés. Test des boues Nous proposons également des tests de boues qui consistent à appliquer une pression pour évaluer le comportement des boues. Cela permet à FRC de recommander la technologie de déshydratation appropriée.

FRC Systems strives to ensure that its services are accessible to people with disabilities. FRC Systems has invested a significant amount of resources to help ensure that its website is made easier to use and more accessible for people with disabilities, with the strong belief that every person has the right to live with dignity, equality, comfort and independence. Déclaration d'accessibilité Général FRC Systems s'efforce de garantir que ses services sont accessibles aux personnes handicapées. FRC Systems a investi des ressources importantes pour garantir que son site Web soit plus facile à utiliser et plus accessible aux personnes handicapées, avec la ferme conviction que chaque personne a le droit de vivre dans la dignité, l'égalité, le confort et l'indépendance. Nous travaillons pour être compatibles avec le niveau d'accessibilité WCAG 2.1 AA Clause de non-responsabilité FRC Systems poursuit ses efforts pour améliorer constamment l'accessibilité de son site et de ses services, convaincu qu'il est de notre obligation morale collective de permettre une utilisation transparente, accessible et sans entrave également pour ceux d'entre nous qui souffrent d'un handicap. Malgré tous nos efforts pour rendre toutes les pages et contenus de ce site entièrement accessibles, il se peut que certains contenus ne soient pas encore entièrement adaptés aux normes d'accessibilité les plus strictes. Cela peut être dû au fait que nous n'avons pas trouvé ou identifié la solution technologique la plus appropriée. Ici pour vous Si vous rencontrez des difficultés avec le contenu de ce site Web, veuillez nous contacter pendant les heures normales de bureau comme indiqué ci-dessous et nous serons heureux de vous aider. Nous contacter Si vous souhaitez signaler un problème, avez des questions ou avez besoin d'aide, vous pouvez nous contacter ici.

Project profiles play a crucial role in showcasing real-world applications of wastewater treatment solutions. FRC Systems » Project Profiles Submit a Project Profile Solutions for Wastewater Treatment & Management Project profiles play a crucial role in showcasing real-world applications of wastewater treatment solutions. They highlight successful installations, innovative technologies, and industry-specific challenges addressed by FRC Systems. These profiles help potential clients understand the effectiveness of FRC’s dissolved air flotation (DAF) and other treatment systems, demonstrating their impact across industries such as food processing, oil and gas, and municipal water treatment. By detailing system performance, project outcomes, and customer success stories, these profiles serve as a valuable resource for companies seeking reliable and efficient wastewater treatment solutions. If you have any questions regarding a project profile submittal, please feel free to contact: Kevin West Sales & Marketing Specialist FRC Systems - Sulzer kevin.west@sulzer.com See a sample project What is your name and email? First Name* Last name* Email* Great! Now, please provide some details of your project: Company* Should the company name remain confidential?* Yes No Does FRC have permission to publish the customer's name in marketing materials? Industry* FRC Solution* Application * Components Used:* Biological - MBBR Biological - MBR DAF - PWL DAF - PCL DAF - PCCS Flocculator Oil Water Separator Screen Dewatering Belt Press Dewatering Volute Press Effluent Buffer Tank Equalization Tank Reactor Tank Other You can select 1 or more components. Project Description - Problem* Project Description - Solution* Design Data Upload Design Data An image (.png or .jpg) or spreadsheet (.xls) table that includes flow rates, TSS, FOG, BOD, pH, regulatory data, etc. Process Flow Diagram (PFD) Upload PFD If a graphic format is unavailable, a photo of a sketch will be sufficient. Photos and/or Videos Upload Media Upload 4-10 photos and/or videos showcasing the FRC solution and equipment. ie. SCADA screens, tanks, DAF systems, flocculators, etc. Submit for Review

This comprehensive guide helps engineers, plant owners, and decision-makers navigate the complexities of DAF selection, ensuring they invest in a high-performing, durable, and cost-effective solution tailored to their specific needs. The Ultimate DAF System Buyer's Guide Critical Considerations For Choosing A High-Performing DAF System This comprehensive guide helps engineers, plant owners, and decision-makers navigate the complexities of DAF selection, ensuring they invest in a high-performing, durable, and cost-effective solution tailored to their specific needs. Key Takeaways: Critical design considerations for selecting the best DAF system Insights on aeration, dissolved air distribution, and sludge handling Material selection for durability and long-term performance Automation and control features to enhance efficiency Application-specific engineering for optimal wastewater treatment Make an informed decision and ensure your wastewater treatment system operates at peak performance. To download the guide, please provide the following: First name* Last name* Email* Company name* Yes, subscribe me to your newsletter. Download the Guide

Pilot tests provide an excellent opportunity to deliver proof-of-concept that FRCs engineered solutions will successfully perform for your application. Systèmes FRC » Services Essais pilotes Solutions pour le traitement et la gestion des eaux usées Liens rapides Capacités de test pilote FRC Grande flotte de pilotes Systèmes Plug & Play Savoir-faire en ingénierie Assistance mondiale Obtenez un aperçu réel de la façon dont votre système réagira au traitement. Les essais pilotes FRC constituent une excellente occasion de prouver que les solutions techniques FRC fonctionneront avec succès pour votre application. Au cours des essais, nous pouvons obtenir des informations réelles sur la façon dont les eaux usées de votre usine réagissent au traitement. Vous obtiendrez des informations précieuses sur le niveau de qualité des effluents qui sera atteint, vous obtiendrez des chiffres réels sur les coûts des produits chimiques en cours et vous verrez quel volume de boues est produit au cours du processus de traitement. C'est quelque chose qui ne peut tout simplement pas être réalisé dans la théorie de la conception. FRC concevra pour vous une solution personnalisée en fonction des résultats du test pilote. Grande flotte de pilotes La flotte pilote FRC comprend une flotte complète de systèmes, notamment les suivants : DAF et DGF à taux élevé DAF de type ouvert Floculateur Tamis à tambour rotatif Filtre-presse à bande IPC Système d'aération Système de dosage chimique Systèmes Plug & Play Nos ingénieurs configurent chaque système pilote FRC de manière à ce qu'il soit « plug-and-play » pour faciliter l'installation et le démarrage. Après le test pilote, vous pouvez continuer à louer l'unité pendant qu'un système permanent est conçu et installé sur site. Dans certains cas, le système peut même être disponible à l'achat, offrant ainsi une solution immédiate à votre situation. Savoir-faire et assistance en ingénierie Les services d'ingénieurs FRC sont fortement recommandés pour la supervision sur site lors des tests pilotes en raison de leur vaste savoir-faire en matière d'application et de processus. Leurs services comprennent : Inspection de l'installation avant le démarrage Supervision de la mise en service et du démarrage du système Formation des opérateurs pour le système pilote Entretien de l'équipement Procédures opérationnelles Fonctionnement du système

Nous ne trouvons pas la page que vous recherchez Cette page n'existe pas. Allez à l'accueil pour continuer à naviguer. Aller à l'accueil

New Page New Page New Page New Page Industries New Page Food & Beverage General Manufacturing Meat & Seafood Processing Municipal Oil & Gas Solutions Project Archive PCL & PCCS High-Rate DAF PWL Open-Style DAF Flocculators Oil & Water Separators Belt Press Multi-Disk Volute Press Biological - MBBR Biologicial - MBR Screens Rentals & Pilots System Upgrades Aftermarket & Spare Parts Services Pilot Testing Jar Testing Resources Knowledge Center News New Page FAQ About FRC About FRC Sales & Support Team Directory Privacy Privacy Privacy Accessibility

FRC Systems Member Site | Members get access to whitepapers, case studies and more. Sign Up / Log In Menu Menu Item Se connecter Media Center (Sign Up for Access) Once the content is ready to publish in the exclusive member-only Media Center... ...this element will reside in 2 locations: under the Contact Us button on the right side of the header. in the footer, below the help menu. It will also have its own drop-down menu containing logged-in member only items such as: All member pages Account Settings Profile Notifications Logout ...this element will reside in at least 2 locations: in the Resource dropdown menu item above. in the footer all relevant locations, such as blog posts, product pages, etc.

FRC Systems | Testing Environment | For testing purposes only. Tailored solutions with unmatched expertise. FRC Systems is your trusted wastewater solutions provider. See Us In Action Contact Us